The Heart of the Matter

Today is the day I have dreamt about for a very long time. My RD400 motor was assembled and ready to be picked up!! I arrived a few minute before 9am at Paul's house. As always, he had his garage opened already and was waiting for me. I saw the engine and tt was beautiful!

He helped me install the shift rod and tachometer drive components. Then he went over the break-in routine for the motor. Of course, half of that went in one ear and out the other. We told stories, he helped me to load all the parts into my Jeep, then I was off.

I spent part of the rest of the day cleaning engine mounting parts, mixing and matching with a spare set that I had on hand. One of my front mount spacer tubes got slightly dented, so the mounting bolt didn't want to slide through, meaning I had to use one of the yucky corroded ones. I tried cleaning/polishing it for a while with some success, but in the end, I just wanted to plug the motor in the frame, so the refurbishing will have to wait till the motor moves to the other frame. I also discovered that I am one rear mounting bolt short of a full set! After scouring through my archive of old documentation photos, I noticed that I never even had one in the first place! Thank God for eBay! In the end, I was successful in mounting the motor in the frame, minus one rear mounting bolt.

I fitted the carbs on the engine, then the Y-boot with the K&N air filter on it. (I still have to locate the manifold clamps. I hope I don't need to order more parts!) Surprisingly, the filter sticks way above the frame rails where the new seat will go. Hmmm...I don't ever recall anyone making mention of this problem. I do know that K&N makes a shorter filter. Maybe others have been using the short filters? In any case, I do happen to have a foam Unifilter that I can fit on there if I don't feel like buying a another K&N filter.

This week is going to be hella busy. I'm working a shit ton of hours and weird shifts, due to coworkers taking random vacation days off, and the management not hiring much needed extra help. I'm also shoving off for a cruise to Alaska on Friday. Of course I have to work all the way through Thursday, then take my dog and drop off a second car at a relative's house after work, not to mention that it's actually my birthday that day :(

But if I get the chance, I would love to start hooking up some cables, getting a little closer to a "complete" bike, so I can get the bike VIN verified by my local DMV. What a total hassle!!!!

Let There Be Light!!

Well, as soon as I can hook up the harness and the battery, there will be light...

In one of my earlier entries, I noted that my headlight rim was severely scratched. I just picked it up today from High Lustre Chrome Plating in Hayward this morning.Rich did a phenomenal job on the rim. It actually does look better than brand new. He charged me $125 for the job (although he quoted me $90 over the phone), but his turn around was like 3 business days!

Over the past few days, I bought a few LED lighting pieces for the bike- 2 turn signal sets and a brake lamp. All the items arrived already, so I got to work on mounting up the headlamp assembly. Some of my headlamp parts were missing or too damaged to use. Good thing I had a second headlamp bucket and parts! I bought a new reproduction mount kit from EconomyCycle to help with the mounting. The holes in the aluminum ears that I bought were a little too small, so I had to file on them for a bit with a rat-tail file. I also upgraded the headlight to a Hella H4 headlight and replaced the supplied H4 bulb with a PIAA Night-Tech 60/55W bulb- that should make huge difference in seeing at night! Everything went together beautifully! So now the front end is pretty much finished with the exception of reshaping and painting the front fender. Oh, and I still need to get those wheels finished!

Paul asked me to get a few missing and worn parts. I ordered them from Partzilla, since they seem to have the best OEM prices around. Unfortunately, they're waiting on one part to arrive before shipping them out to me, so this order will take about 2 weeks to process :(

In the meanwhile, I picked up my freshly honed cylinders last Sunday. After all the honing oil and Simple Green, the paint job I had done was fairly ruined. (He did warn me about that, but I just wanted to get them painted, while they were not assembled yet.) I just repainted them again. It didn't take long since I had done them once before. I'll return them this Sunday, so Paul can resume work on the motor.

I'm still awaiting my replacement seat pan from the UK. It should be here on Saturday. When that arrives, I can pull out the other frame and start fitting the seat to it. I will probably have to grind off the hinges and the seat lock, possibly even cut off the end of the frame. After I weld a chunk of metal to the front of the headstock (the steering turn-to-turn lock), I can take the frame down to the powdercoater to shoot the paint.

If I can get the front fender shaped, I can drop off all the parts to Ryan, my painter. So if I'm lucky, the motor, the frame and the painted parts will be ready all at the same time! Now this has become an exercise in project management! We're really starting to come to a close fast!